SATA to USB adapter up to 6Gbps…

oleh -54 Dilihat

— USB Attached SCSI Protocol (UASP) for streaming — Supports multiple LUNFast 8051 Macro cell 80C32-Compatible Microcontroller
Speed ​​of HDD (500GB) connected via this adapter: I can’t single out anything special as a plus or a minus. As you can see, it connects to a computer and phone without any problems. Supporting Bulk-Only Transport (BOT) USB storage class, VL711 based devices can run Windows 10, Windows 8, Windows 7, Vista, XP, 2003/2000/ME, Mac OS X and various Linux kernels without additional drivers. Its built-in SATA 6Gb/s host controller can
work with all SATA-based storage devices and can automatically connect at SATA 6Gb/s, SATA 3Gb/s, or SATA 1.5Gb/s. It just does what it’s supposed to do reliably.

SATA to USB adapter up to 6Gbps (2.5 inch external SSD and HDD hard drive)

— Supports Microsoft Windows 8,Windows 7, Vista, XP, 2003 , 2000, and ME There were no problems connecting and opening files. Its built-in internal USB PHY allows the VL711 to operate in USB Super-Speed, High-Speed ​​and Full-Speed ​​modes. — Supports devi ce power down function
USB 2.0 and Type C are also available.
I chose a USB 3.0 adapter. — 7 GPIOs in QFN48 and QFN44 for special https://jiji.co.ke/accessories/blue customer usage Only available for laptop hard drive and SSD, not available for 3.5" desktop hard drive. — Standard 1T 8051 instruction setBuilt-in Voltage Regulators VIA Lab’s VL711 is a high-performance, low-power, single-chip USB 3.0 bridge controller with SATA 6Gb/s designed for next-generation external storage devices connecting hard disk drive (HDD), solid state drive (SSD) . — 5.0V to 3.3V LDO — Supports EEPROM for customized PID/VID/SN…Software Super-Speed ​​USB (5Gb/s) and High-Speed ​​USB (480Mb/s) Conclusion: Cheap and fast adapter. There are probably better ones, but I chose this one. — Supports external SPI flash for firmware upgrade
Speed ​​of SSD (256GB) connected via this adapter:
As soon as I received this adapter, I tested it: Let’s see what’s inside the adapter itself, which allows it to quickly connect: — 5.0V to 1.2V switching DC-DCGPIOs for Special Function Usage
— 2 dedicated BUSY /POWER LED indicatorsMisc — Integrated in-house SATA 6Gb/s PHY Blue voltage (power) and red access (access) to the disk. Brought to connect any standard 2.5" SATA SSD or HDD to a computer via USB 3.0 ports. — RBC command conversion for ATA device — MMC-2 command pass-through to ATAPI Apart from Bulk-Only Transport, the VL711 also supports USB Attached SCSI Protocol (UASP), which allows mass storage device command queuing and out-of-order data transfer to further improve read/write performance. — Supports 48-bit LBA — Supports various Linux kernels — Supports Mac OS 10.X — Integrated in-house Super-Speed ​​PHY and USB 2.0 PHYSerial ATA 6Gb/s, 3Gb/s and 1.5Gb/s Integrated with all the necessary linear and switching voltage regulators, the highly integrated VL711 works great with a single 5V USB bus power input, reducing the cost. Tried SSD from 120 to 500 GB and HDD from 500 GB. — Compliant to Serial ATA Specification Revision 3.1 The adapter works on the controller VL711 – Low Power Super Speed ​​USB 3.0 to SATA 6Gb/s Bridge Controller — Compliant to Universal Serial Bus Specification Revision 1.0 This type of adapter can always be useful and worth buying, especially if you compare its price and There are two LED indicators on the top of the adapter. — Compliant to Universal Serial Bus Specification Revision 2.0 < br />— Mass Storage Class Bulk-Only Transport (BOT)

No More Posts Available.

No more pages to load.